Philips HX9882/33, HX9500 manual Dual Speed Control

,Green LED in position 4: Quadpacer active (factory default setting).

,Green LED in top (5th) position: 2 1/2 minute setting - Quadpacer active with additional timing interval of 30 seconds.

,Yellow LED in bottom (1st) position: no timing intervals set -

Quadpacer not active.

4To program the desired setting, release the button when the LED corresponding to your choice lights up.

Note: Selecting 2 1/2 minutes brushing time reduces the number of brushings available from a fully charged battery.

Dual Speed Control

The Dual Speed Control feature allows you to choose between 2 speed

settings: Normal speed (Max) for optimum brushing performance, or

Reduced speed (Gentle) when an even more gentle action is desired. Each time you turn your Sonicare on, it will begin brushing at the Normal

speed setting.To change the speed setting:

1From Normal to Reduced speed: press the Dual Speed Control button once during brushing.

2From Reduced to Normal speed: press the Dual Speed Control button a second time during brushing.

A distinctive two-tone beep indicates that the speed setting has been changed.

It is recommended that you brush at the Normal speed setting to maintain optimal results.

The Normal setting should be selected when Sonicare is used in clinical trials.