Philips HX9500, HX9882/33 manual Smartimer\ 2-minute timer, Quadpacer\ 30-second interval timer



Using the Easy-start feature beyond the initial ramp-up period is not recommended and reduces Sonicare’s effectiveness in removing plaque.

The Easy-start feature should be deactivated when Sonicare is used in clinical trials.

Smartimer\ 2-minute timer

,All Sonicare models come with the Smartimer feature, which automatically sets the brushing time to the 2 minutes recommended by dental professionals.

,After 2 minutes, your Sonicare will automatically turn off the toothbrush.

,If you wish to pause or stop brushing during your 2-minute cycle, press the power button. Press the power button again and the

Smartimer will pick up where you left off.

Note:The Smartimer will automatically reset to the beginning of a 2-minute cycle if:

-brushing is paused for 30 seconds or longer;

-the handle is returned to the charger.

Quadpacer\ 30-second interval timer

1

3

,Quadpacer makes sure that you brush all sections of your mouth evenly and thoroughly.When using a two-minute brushing cycle, you will hear a short beep and a pause in brushing action at 30, 60 and 90 second intervals.

Programmable Quadpacer timer (select models only)

The Programmable Quadpacer timer offers you the option of customizing

the Quadpacer performance in 1 of 3 ways:

,You may opt to keep the factory default setting of a 2-minute brushing time with Quadpacer feature activated.

,You may choose to extend your brushing time to 2 1/2 minutes by adding an additional timing interval of 30 seconds with Quadpacer feature active.

,You may choose a 2-minute brushing time, but with the Quadpacer

feature turned off.

To change the Quadpacer settings:

1Place the handle in the charger that is plugged into a live electrical outlet.

2Press the Dual Speed Control button briefly and note which LED lights up.

3Press and hold the Dual Speed Control button. Continue to hold the button while the LEDs slowly cycle through the timing interval setting options.