Command pads
The command pads tell the oven what to do and in what order. A few examples:
-Clock/!ht tells the oven you are going to set the clock.
Each command pad (except Off/Cancel and Start/ Enter) has its own indicator. The indicator comes on when YOU push the command pad.
Setting the clock
1.Push the Clock/Set pad. The colon flashes and TIME will light up in the display.
2.Use the Hour and Minute pads to set the time of day. Push the “up”(A) or “down” (V) pad(s) until the correct time shows in the display.
3.Push the Start/Enter pad.
NOTE: If you do not want the clock time dis- played, push and hold the Clock/Set pad for
4 seconds. To display the clock time again, push the Clock/Set pad once, then reset the clock time it necessary.
Using the electronic Minute Timer
The Minute Timer does not start or stop the oven. It works like a kitchen timer. You can set it in hours and minutes up to 11 hours, 59 minutes. The Minute Timer will display minutes and seconds for settings under one hour. You will hear four
1.Push the Timer Set pad. TIMER will come on and the display will show “0:OO”with the colon flashing.
