Whirlpool SF387PEY, SF397PEY, SF387PCY manual Push the Start/Enter pad. “Lo”“,HEAT

After you have set the desired temperature. the display will show the set temperature and the time of day. BAKE will light up.

3.Push the Stop Time pad. The time of day with the colon flashing and STOP TIME will show in the display.

4.Use the Hour and Minute pads to set the desired stop time. Push the “up”(A) or “down” (r) pad(s) until the correct time shows in the display.

This example shows a desired stop time of 2 o’clock. This provides a 2-hour cook time (the difference between the time of day and the stop time).

5.Push the Start/Enter pad. “Lo”“,HEAT,

TIMED and BAKE will light up in the display to indicate that the oven is heating.

NOTE: The display will show “door” and a tone will sound once a minute for 5 minutes if the door is latched when you try to bake/roast.

You can change the temperature or time

settings any time after pushing the Start/Enter pad by repeating just Steps 2 through 4.

6.The display will count down the baking/ roasting time in minutes.

7.When the bakfng’roasting time is completed, the oven will turn off automatically, beep four times and “End” will show in the display. You will also hear four 1-second tones every minute until you push the Off/Cancel pad.

NOTE: To disable reminder tones, push and hold the Cook Time pad for 4 seconds. To reactivate tones, repeat this procedure.

To cancel the MEALTIMER” control setting:

lPush the Off/Cancel pad to return the display to the time of day.

19