4.Use the Hour and Minute pads to set the desired cooking time. Push the “up”(A) or “down” (V) pad(s) until the correct time shows in the display.

This example shows a desired baking/roasting time of 30 minutes.

5.Push the Start/Enter pad. “Lo”“,HEAT,

BAKE, TIMED and the set cook time will show in the display to indicate that the oven is heating.

NOTE: The display will show “door” and a tone will sound once a minute for 5 minutes if the door is latched when you try to bake/roast.

You can change the temperature or time settings any time after pushing the Start/Enter pad by repeating just Steps 2 through 4.

6.The display will count down the baking/ roasting time in minutes.

7.When the baking/roasting time is completed, the oven will turn off automatically, beep four times and “End” will show in the display. You will also hear four l-second tones every minute until you push the Off/Cancel pad.

NOTE: To disable reminder tones, push and hold the Cook Time pad for 4 seconds. To reactivate tones, repeat this procedure.

To cancel the MEALTIMER” control setting:

l Push the Off/Cancel pad to return the display to the time of day.

Method Z-Using Stop Time:

1.Position the oven rack(s) properly and put food in the oven.

2.Push the Bake pad to enter the Bake mode. Use the Temp pad(s) to set the desired temperature. Push A to raise the temperature or V to lower the temperature in 5°F incre- ments. Use these pads until the desired temperature shows in the small display.

18

Page 18
Image 18
Whirlpool SF397PEY, SF387PEY manual Method Z-Using Stop Time, Display will count down the baking/ roasting time in minutes