To delay the start using Delay Start Time:

Push the Clean pad. Push the Delay Start Time pad. START, TIME, CLEAN and “cln” will light up.

Use the Hour and Minute pads to set the desired start time. Push the “up”(A) or “down” (V) pad(s) until the correct time shows in the display.

Push the Start/Enter pad. DELAY, CLEAN and the time of day will light up in the display to indicate that the oven is programmed to start the Self-Cleaning cycle at a later time.

After the start time has been set, the large display will go back to showing the current time of day. DELAY and CLEAN will stay on. When the start time is reached, DELAY will go off, TIMED, HEAT, CLEAN and CLEAN TIME will light up and the oven will start to clean.

4.After the Self-Cleaning cycle is started, LOCKED lights up in the display when the oven temperature goes above normal baking/ roasting temperatures. The Lock Lever must not be moved and the door cannot be opened when LOCKED is on.

5.After the Self-Cleaning cycle is completed, the time of day will show in the display.

6.When the oven reaches normal baking/ roasting temperatures, LOCKED goes off and “End” and CLEAN TIME come on. Move the Lock Lever back to the left. DO NOT FORCE IT. Wait until it moves easily.

30

Page 30
Image 30
Whirlpool SF397PEY, SF387PEY, SF387PCY manual