Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service center.
WARNING!
Do not dismantle the unit as there is a risk of electric shock! Under no circumstances should you try to repair the set yourself, as this will invalidate the warranty.
No picture is taken, but I press the shutter button all the way down
–
•Charge the battery (see page 10)
–Camera memory capacity full.
•Transfer pictures / other files to your computer to free memory space (see page
–Camera is connected to the PC’s USB port
•Unplug the camera from the USB port
–Poor light condition
•Check the surrounding light conditions
–The camera may have automatically powered off.
•Switch the camera off and switch on again (see page 12)
No reaction to controls
–
• Charge the battery (see page 10)
Unusually slow rate of file transfer to/ from my camera
–Win XP OS operating on
•With your camera connected to your PC, modify your default setting by clicking on the following:
1From the taskbar, click Start ➜ Settings ➜ Control Panel ➜ System ➜ System Properties ➜ Hardware ➜ Device Manager ➜ Disk drives.
2Select and double click on your camera model name Philips Keyring 0XX USB Device to enter the Philips Keyring XXX USB Device Properties dialogue box (where X refers to your model number).
20
