4 Use your SpeechMike
This chapter describes how to use the SpeechMike with Philips SpeechExec dictation software. If the SpeechMike is used with third- party software other than Philips SpeechExec, some features may not be present or function differently. For detailed information, refer to the documentation delivered with the software.
4.1Create a recording
1The SpeechMike must be connected to the computer with the USB cable.
2Press the d RECORD key to create a new recording and enter Record standby mode.
•The recorder window is displayed.
•The record indicator light flashes red (in overwrite mode) or green (in insert mode).
3Press the e key and start speaking. The record indicator light glows in red (in overwrite mode) or green (in insert mode) while recording.
4For short pauses, press the e key. To continue recording, press the e key again.
5To stop recording, press the d RECORD key.
6Press the • EOL/• • PRIO key to mark the recording as finished.
•The dictation file is moved to the Finished dictations folder.
•The recorder window closes and the work list window is displayed.
7To assign priority status to the recording, press the • EOL/• • PRIO key again within half a second.
DNote
For best results, speak clearly and keep the microphone about 10 to 15 centimeters (4 to 6 inches) away from your mouth.
E N G L I S H
4.2Use the bar-code scanner (LFH3300 only)
1Press the scan button and scan the barcode. When a barcode is recognized, the SpeechMike will beep and the barcode information is inserted into the currently active application as if the barcode number is typed in digit by digit.
DNote
The barcode scanner allows barcode scanning from a distance of up to 30 cm / 12 inches.
User manual | 9 |
