Introduction, Description, View of the ITLPC2138 | Philips specs

Introduction

Introduction

NXP LPC2138 Target Board is an evaluation and a development system for NXP ARM7TDMI-S based LPC2138 microcontroller. The ITLPC2138 package consists of a USB cable and a target board populated with NXP LPC2138 CPU, minimum peripherals, JTAG debug connector, ETM trace connector and an on-board integrated iSYSTEM debugger.

The user can write and debug the application using the on-board integrated iSYSTEM debugger, which connects to the PC through the USB connection. The board requires no external power supply since it’s powered from the PC USB port.

An external ARM7TDMI-S debugger (including e.g. ETM support) can be used for debugging as an alternative to the on-board integrated debugger.

Description

View of the ITLPC2138

Figure 2: Top View of the ITLPC2138

© iSYSTEM, March 2007

3/13

Image 3

Philips dimensions Introduction, Description, View of the ITLPC2138

Contents

Ordering code User’s GuideDimensions Philips/NXP LPC2138 Target Board Contents Introduction DescriptionView of the ITLPC2138 Notes Block Diagram Description Power SupplyComponents List Name Jumper & Connector Descriptions P21 16 Pin LCD Connector see connectorsP12 Manufacturing purpose connections Symbol ConnectorsDB9 male connector UART1 P35 16-pinLCD connector P21 38-pinMictor JTAG Debug & ETM Trace Connector P32 20-pinJTAG Debug Connector P33 Figure 4 Expansion connectors CPU expansion connectors 10/13 Schematic Use of the on-boardintegrated debugger Setting up a debug environment for the first time Use of an external debugger Troubleshooting