5 Specifications
Note
•• Specifications are subject to change without notice
Output | VGA, QVGA |
resolution |
|
Lens | F2.8 |
Frame rate | 30 fps at VGA, QVGA |
Focus mode | 0.4 m |
Focus range | 1 m to infinity |
Video format | h.264 |
Connectivity | |
Power supply | DC 5V, 600mA; |
| Model name: |
| |
| e and i) |
| a direct |
| with USB output terminal |
| and a different country plug |
| type ('a'=America, 'b'=Britain, |
| 'c'=Australia, 'e'=Europe |
| 'i'=China) |
Dimensions | 35.9 x 83.8 x 34.3mm |
(w x h x d) |
|
Net weight | approx. 52g |
Operating | 0 to 40 degrees celsius |
temperature |
|
Software | Android 2.2 or above |
supported |
|
6 Troubleshooting
Warning
•• Risk of electric shock. Never remove the casing of the monitor.
To keep the warranty valid, never try to repair the monitor yourself.
If you have problems using this monitor, check the following points before you request service. If you still have a problem, register your monitor and get support at www.philips.com/support.
Cannot connect the monitor to a
•If the monitor blinks amber, you can
•If the monitor still does not work or is blinking green or amber, you may need to reset the monitor by pressing the reset button with a thin object (i.e. paper clip) on the back of the monitor, press and hold the thin object for
•Philips In.Sight supports general WEP, WPA and WPA2. Philips recommends using WPA or WPA2 as these are the safest
WPA2 if you are not able to connect, refer to your router’s user manual.
•To improve wireless performance, avoid using a
(e.g. channel 11) or overlapped with a nearby other
•Keep away from potential sources of interference which may affect
•Unlike legacy solutions, In.Sight does not require port forwarding.There is no risk from leaving ports open on the
EN 9