Philips MC-V320 manual Radio Reception, Tuning to radio stations, Programming radio stations

Radio Reception

E n g l i s h

Tuning to radio stations

1Select TUNER source.

➜TUNER is displayed briefly.

2Press BAND on set only once or more to select your waveband (FM/ MW).

3Press down TUNE or and release button.

➜The radio automatically tunes to a station with sufficient reception. Display indication during automatic tuning: SEARCH.

➜If a FM station is received in stereo, is shown.

4Repeat step 3 if necessary until you find the desired station.

●To tune to a weak station, press TUNE or briefly and repeatedly until you have found optimal reception.

Programming radio stations

You can store up to a total of 40 radio stations in the memory.

Automatic programming

Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden.The system will only program stations which are not in the memory already.

1Press PRESET or to select the preset number where programming should start.

Note:

– If no preset number is selected, default is preset

(1) and all your presets will be overridden.

2Press PROG/ REV (PROGRAM on remote control) for more than 2 seconds to activate programming.

➜ AUTO is displayed and available stations are programmed in order of waveband reception strength: FM followed by MW The last preset automatically stored will then be played.

Manual programming

1Tune to your desired station (see “Tuning to radio stations”).

2Press PROG/ REV (PROGRAM on remote control) to activate programming.

3Press PRESET or to allocate a number from 1 to 40 to this station.

4Press PROG/ REV (PROGRAM on remote control) again to confirm the setting.

➜ The preset number and the frequency of the preset station are shown.

5Repeat the above four steps to store other stations.

●You can override a preset station by storing another frequency in its place.

20