Philips MC10 manual Compact Disc, Selecting a different track, Playing a disc

Compact Disc

English			CD	PROGRAM
STANDBY		PROGRAM
ON
				TIMER
SELECT				ON • OFF
SOURCE
DBB	DSC	INCREDIBLE SURR.
INTERACTIVE SOUND
				VOLUME
iR SENSOR	STOP	PRESET	PLAY•PAUSE	RDS
				CLOCK
REPEAT	PREV	TUNING	NEXT	SHUFFLE
BAND
IMPORTANT:

The lens of the CD player should never be touched.

X

➜The display freezes and the elapsed playing time flashes when playback is interrupted.

6To stop disc playback, press STOP 9. Note: CD play will also stop when;

–the CD door is opened.

–the disc has reached the end.

–you select another source:TAPE,TUNER or AUX.

–you select to standby.

–you press the tape deck PLAY 2 key.

Selecting a different track

¶Press PREV ¡1 or NEXT 2™ on the system, (on the remote control ¡ or ™) once or repeatedly until the desired track number appears in the display.

¶If you have selected a track number shortly after loading a disc or in the PAUSE position, you will need to press PLAY•PAUSE 2; (on the remote control 2) to start playback.

Playing a disc

This CD player plays Audio Discs including CD- Recordables and CD-Rewritables.

¶CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible.

1Select CD source.

OPEN • CLOSE

2 Press OPEN•CLOSE on the top of the system to open the CD compartment.

➜OPEN is displayed when you

open the CD compartment.

3Insert a disc with the printed side

facing up and press down on OPEN•CLOSE to close the CD door.

➜READ is displayed as the CD player scans the contents of a disc, and then the total number of tracks and playing time are shown.

4Press PLAY•PAUSE 2; (on the remote control 2) to start playback.

➜Current track number and elapsed playing time of the track are displayed during disc playback.

5To interrupt playback press PLAY•PAUSE 2; (on the remote control SIDE/;). Press PLAY•PAUSE 2; (on the remote control 2) again to resume play.

12

Finding a passage within a track

1Press and hold down on PREV ¡1 or NEXT 2™.

➜The disc is played at high speed and low volume.

2When you recognise the passage you want, release PREV ¡1 or NEXT 2™.

➜Normal playback continues.

Note:

–During a disc programme or if SHUFFLE/ REPEAT active, searching is only possible within the same track.

Different play modes: SHUFFLE and REPEAT

You can select and change the various play modes before or during playback.The play modes can also be combined with PROGRAMME.

SHUFFLE ......... tracks of the entire disc/

programme are played in random order

SHUFFLE and REPEAT ALL…to repeat the entire disc/ programme continuously in random order

REPEAT ALL ... repeats the entire disc/ programme

REPEAT ............ plays the current track

continuously

pg 001-020/MC10/22-Eng 12 12/7/00, 1:29 PM 3140 115 27752