Philips MC108B user manual CD Operation, Selecting a different track, Compartment

CD Operation

English

M I C R O S Y S T E M M C 1 0 8

iR

PROG TRK DBB

REP ALL

CD

AUX-IN

IMPORTANT:

The lens of the CD player should never be touched.

5To pause playback press 2;. Press 2; again to resume play.

➜ The display freezes and the current track number flashes when playback is paused.

6To stop disc playback, press 9. Note: CD play will also stop when;

–the CD door is opened.

–the disc has reached the end.

–you select another source: AUX,TUNER.

–you select standby.

Selecting a different track

●Press ¡1 or 2™ once or repeatedly until the desired track number appears in the display.

●If you have selected a track number shortly after loading a disc, or in the PAUSE position, you will need to press 2; to start playback.

Finding a passage within a track

Playing a disc

This CD player plays Audio Discs including CD- Recordables and CD-Rewritables.

¶CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible.

1Press and hold down ¡1 or 2™ .

➜ The disc is played at high speed and low volume.

2When you find the passage you want, release ¡1 or 2™ .

➜ Normal playback continues.

1

2

Select CD source.
Press OPEN¥CLOSE on the	O
top of the system to open the
CD compartment.

➜ is displayed when you open

compartment.

PEN / CLOSE

the CD

3Insert a disc with the printed side facing up and press down on OPEN¥CLOSE to close the CD door.

➜ is displayed as the CD player scans the contents of a disc. The total number of tracks and time are also shown.

4Press 2; to start playback.

➜ Current track number followed by elapsed playing time of the track are displayed during disc playback.

1010