English
xxxxx
13
Clock/Timer
AUX-IN
MC108MICROSYSTEM
iR
Setting the timer
●The system can be used as an alarm clock. CD
or TUNER can be set to switch on at a preset
time. The clock time needs to be set first before
the timer can be used.
●If no button is pressed within 90 seconds during
timer setup, the system will exit timer setting
mode automatically.
1In any mode, press TIMER (on the remote
control) for more than 2 seconds.
2Press ¡1 / 2™ (or CD / TUNER on the
remote control) to select sound source.
3Press TIMER to confirm your desired source.
➜ The clock digits for the hours flash.
4Press ¡1 / 2™ to set the hours.
5Press TIMER again.
➜The clock digits for the minutes flash.
6Press ¡1 / 2™ to set the minutes.
7Press TIMER to confirm the time.
➜The timer is now set and actiated.
Notes:
- If source CD is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
- The volume level will be increased from min. to 20
within 2 minutes after alarm wake up.
Activating and deactivating
TIMER
●In standby or during playback, press
TIMER once.
➜Display shows if activated, and disappears
if deactivated.
Setting the clock
1In Standby mode, press PROG/CLOCK
button.
➜The clock digits for the hours flash.
2Press ¡1 / 2™ to set the hours.
3Press PROG/CLOCK again.
➜The clock digits for the minutes flash.
4Press ¡1 / 2™ to set the minutes.
5Press PROG/CLOCK to confirm the time.
Note:
– If the clock has not been set, --:-- will be
displayed.
MC108B_79_Eng 14/2/07, 11:3313