Philips MC118 manual Different play modes SHUFFLE and REPEAT, Selecting a different track

MC 118 / 22 page 8

English

5To interrupt playback press PLAY•PAUSE 2; (on the remote control SIDE/ ;). Press PLAY•PAUSE 2; (on the remote control 2) again to resume play.

ªThe display freezes and the elapsed playing time flashes when playback is interrupted.

6To stop CD playback, press STOP 9.

Note: CD play will also stop when:

– the CD door is opened

– the CD has reached the end

– you select another source: TAPE, TUNER or AUX

Different play modes: SHUFFLE and REPEAT

You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAM.

SHUFFLE . . . . . . . . . . tracks of the entire CD/ programme are played in random order

SHUFFLE and

REPEAT ALL . . . . . . . . to repeat the entire CD/ programme continuously in random order

REPEAT ALL . . . . . . . . repeats the entire CD/ programme REPEAT . . . . . . . . . . . plays the current track continously

STANDBY	M C	1 1 8	M I
ON				C R O	S Y S
						T E M
					CD	TIMER
				PROGRAM
SELECT
	DBB	DSC			VOLUME
				INCREDIBLE
SENSOR	INTERACTIVE			SURROUND
IR
		SOUND
REPEAT
BAND

OPEN•CLOSE

PROGRAM

TIMER

ON • OFF

RDS

CLOCK

SHUFFLE

– you press to standby

– you press the tape deck PLAY 2 key

Selecting a different track

•Press PREV Á1 or NEXT 2ª on the set, (on the remote control Á or ª) once or repeatedly until the desired track number appears in the display.

•If you have selected a track number shortly after loading a CD or in the PAUSE position, you will need to press PLAY•PAUSE 2; (on the remote control 2) to start playback.

Finding a passage within a track

1Press and hold down on PREV Á1 or NEXT 2ª.

–The CD is played at high speed and low volume.

2When you recognize the passage you want, release PREV Á1 or NEXT 2ª.

–Normal playback continues.

Note: During a CD program or if SHUFFLE/ REPEAT active, searching is only possible within the same track.

1To select your play mode, press the SHUFFLE or REPEAT button before or during playback until the display shows the desired function.

2Press PLAY•PAUSE 2; (on the remote control 2) to start playback if in the STOP position.

ªIf you have selected SHUFFLE, playback starts automatically.

3To return to normal playback, press the respective SHUFFLE or REPEAT button until the various SHUFFLE/ REPEAT modes are no longer displayed.

– You can also press STOP 9 to cancel your play mode.

Programming track numbers

Programme in the STOP position to select and store your CD tracks in the desired sequence. If you like, store any track more than once. Up to 20 tracks can be stored in the memory.

1Press PROGRAM on the set or remote control to enter the programming mode.

ªA track number is shown and PROGRAM flashes.

2Use the PREV Á1 or NEXT 2ª on the set, (on the remote control Á or ª) to select your desired track number.

3Press PROGRAM to confirm the track number to be stored.

ªThe number of tracks programmed and total playing time of the programme is shown briefly, then the selected track and PROG.

4Repeat steps 2-3to select and store all desired tracks.

ªFULL is displayed if you attempt to programme more than 20 tracks.

8