Philips MC138 owner manual Clock/Timer, Setting the clock, Viewing the clock, Setting the timer

Clock/Timer

Setting the clock

1Press and hold CLOCK button.

➜The clock digits for the hours flash.

2Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to set the hours.

3Press CLOCK again.

➜The clock digits for the minutes flash.

4Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to set the minutes.

5Press CLOCK to confirm the time.

Viewing the clock

To view the clock time in any source mode, press CLOCK, the clock time will be displayed for few seconds.

Note:

–If the clock has not been set, --:-- will be displayed.

Setting the timer

●The system can be used as an alarm clock. CD or TUNER can be set to switch on at a preset time.The clock time needs to be set first before the timer can be used.

●If no button is pressed within 90 seconds during timer setup, the system will exit timer setting mode automatically.

1In any mode, press TIMER for more than 2 seconds.

2Press SOURCE (VOL 3 / 4 on the remote control) to select sound source.

3Press TIMER to confirm your desired source.

➜ The selected source CD or is

shown. The clock digits for the hours flash.

4Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to set the hours.

5Press TIMER again.

➜The clock digits for the minutes flash.

6Press VOLUME 3 / 4 (VOL 3 / 4 on the remote control) to set the minutes.

7Press TIMER to confirm the time.

➜The timer is now set and actiated.

Note:

-Timer will not start if recording is in progress

-If source CD is selected and no disc is in the CD tray or the disc has an error,TUNER will be selected automatically.

Activating and deactivating

TIMER

●In standby or during playback, press TIMER once.

➜ Display shows TIMER if activated, and disappears if deactivated.

E n g l i s h

19