Philips MC147 user manual Basic Functions, Adjusting volume and sound, Switching the system on

	Basic Functions
English	STANDBY-ON	M I C RO S YS T E M M C 1 4 7			Adjusting volume and sound
					1 Press VOL +/- to adjust volume.
					➜ Display shows the volume level VOL and a
					number from 0-32.
	iR	CD/CD-R/CD-RW COMPATIBLE			2 Press DBB to switch bass enhancement on or
					off.
	SOURCE				➜ Display shows:	if the DBB is activated.
		VOL			3 Press MUTE on the remote control to
		TUNING	REPEAT	PROG	interrupt sound reproduction instantly.
	PRESET				➜ Playback will continue without sound.
		VOL
	DBB				● To activate sound reproduction you can:
					– press MUTE again;
					– adjust the volume controls;
	IMPORTANT:				– change source.
	Before you operate the system, complete
	the preparation procedures.

Switching the system on

●Press STANDBY-ON 2 or SOURCE (POWER on the remote control).

➜The system will switch to the last selected source.

●Press DISC, TUN, TAPE or AUX on the remote control.

➜The system will switch to the selected source.

To switch the system to standby mode

●Press STANDBY-ON2 on the system (or POWER on the remote control).

Power-saving automatic standby

The power-saving feature automatically switches to standby 15 minutes after a CD playback has ended and no control is operated.

10