Philips MC150 manual CD Operation, Selecting a different track, Playing a disc

CD Operation

English

IMPORTANT:

The lens of the CD player should never be touched.

5To pause playback press 2;. Press 2; again to resume play.

➜ The display freezes and the current track number flashes when playback is paused.

6To stop disc playback, press 9.

Note: CD play will also stop when;

– the CD door is opened.

– the disc has reached the end.

– you select another source: TAPE,TUNER.

– you select standby.

– you press the tape deck PLAY 2 key.

Selecting a different track

●Press ¡1 or 2™ (à or á on remote control) once or repeatedly until the desired track number appears in the display.

●If you have selected a track number shortly after loading a disc, or in the PAUSE position, you will need to press 2; to start playback.

Playing a disc

This CD player plays Audio Discs including CD- Recordables and CD-Rewritables.

¶CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible.

1Select CD source.

2Press OPEN•CLOSE on the top of the system to open the

CD compartment.

➜OPEN is displayed when you open the CD compartment.

3Insert a disc with the printed side facing up and press down on OPEN•CLOSE to close the CD door.

➜rEAd is displayed as the CD player scans the contents of a disc. The total number of tracks are also shown.

4Press 2; to start playback.

➜Current track number followed by elapsed playing time of the track are displayed during disc playback.

Finding a passage within a track

1Press and hold down ¡1 or 2™ (à or á on remote control).

➜The disc is played at high speed and low volume.

2When you find the passage you want, release ¡1 or 2™ (í or ë on remote control).

➜Normal playback continues.

Note:

–During a disc programme or if SHUFFLE/ REPEAT active, searching is only possible within the same track.

12