Philips MC50-70 manual Clock/Timer, Clock Setting, Display Clock, occurs, automatically, English

		Clock/Timer
PLAY	STOP	CD 1•2•3	English
M I C R O S Y S T E M
STANDBY- ON
PAUSE	DEMO STOP	TUNER
PREV	NEXT
NEWS
PRESET
SEARCH/ TUNE		TAPE
ECO
POWER
PROG	REC	AUX/CDR
iR
		VOL
OPEN
BASS	TREBLE
		- - +	- - +

IMPORTANT!	Notes:
When in Eco Power Standby mode, it is not	– The clock setting will be cancelled when the
possible to operate the clock or timer	power cord is disconnected or if a power failure
function.	occurs.
	– During clock setting, if no key is pressed within
	90 seconds, the system will exit clock setting mode
Clock Setting
The clock can be set in either 12-hour or	automatically.
	– To set the clock automatically through the time
24-hour mode ("AM 12:00" or "00:00" for
	information in the RDS signal, refer to "Radio
example)
	Reception - RDS Time".

1Press and hold CLOCK on the remote control

2	until the time flashing on the display.		Display Clock
	Press PROG on the system repeatedly to select
			The system allows you to select clock display or
	clock mode.
			normal display in any source mode (except Eco
	➜ If 12-hour mode is selected, "AM XX:XX"
			Power Standby mode). When in Standby mode,
	will start flashing.
			the clock will automatically be displayed.
	➜ If 24-hour mode is selected, "XX:XX" will
3	start flashing.	● Press CLOCK on the remote control
	Press à or á on the system repeatedly to set		repeatedly to select clock display or normal
4	the hour.		display mode.
	Press í or ë on the system repeatedly to set		➜ When in clock display mode, clock will be
5	the minute.		displayed. If the clock has not been set, "--:--"
	Press CLOCK again to store the setting.		will appear on the display.
	➜ The clock will start working.		Note:
	To exit without storing the setting		– If you pressed any keys during clock display
			mode, the display will briefly show the information
●	Press Çon the system.
			related to the selected mode.

25

pg 001-029/MC50-70/22-Eng 25 3/7/01, 2:23 PM 3139 115 20742