Clock/Timer

English

Timer Setting

 

 

The system can switch on to CD,TUNER, or

 

TAPE mode automatically at a preset time,

 

serving as an alarm to wake you up.

IMPORTANT!

Before setting the timer, ensure that the clock is set correctly.

The timer will always be switched on after it has been set.

The timer will not start if a recording is in progress.

The volume of the timer will increase gradually from the minimum level to the last tuned volume level.

1Press and hold TIMER on the remote control for more than two seconds.

"AM 12:00" or "00:00" or the last timer setting will start flashing.

TIMER will start flashing.

The selected source will be lighted while other available sources are flashing.

2Press CD 1•2•3, TUNER or TAPE to select the desired source.

Before setting the timer, make sure the music source has been prepared.

CD 1•2•3 – Load the disc(s).To start from a specific track, make a programme (refer to “CD Operation - Programming the disc tracks”). TUNER – tune to the desired radio station.

TAPE – load a prerecorded tape.

3Press à or á on the system repeatedly to set the hour for the timer to start.

4Press í or ë on the system repeatedly to set the minute for the timer to start.

5Press TIMER to store the start time.

"TIMER ON" will be displayed and followed by the set timer "XX:XX" and then the selected source.

TIMER will remain on the display.

At the preset time, the selected source will play.

To exit without storing the setting

Press Çon the system. Notes:

If CD is the selected source and it is not available when the preset time is reached,Tuner will be selected automatically.

During timer setting, if no key is pressed within 90 seconds, the system will exit timer setting mode automatically.

26

pg 001-029/MC50-70/22-Eng

26

To check the TIMER

Press TIMER on the remote control.

If the timer has been activated, the set timer information will be displayed.

If the timer has been deactivated, "OFF" will be displayed.

To activate/deactivate the TIMER

Press TIMER ON/OFF repeatedly on the remote control.

If activated, the last set timer information will be shown for a few seconds and TIMER will appear on the display.

If deactivated, “OFF” will be displayed.

Sleep Timer Setting

The sleep timer enables the system to switch to Standby mode automatically within a preset amount of time.

1Press SLEEP on the remote control repeatedly to select a preset amount of time.

The selections are as follows (time in minutes):

15 ™ 30 ™ 45 ™ 60 ™ OFF ™ 15

"SLEEP XX" or "OFF" will be displayed.

"XX" is the time in minutes.

2When you reach the desired length of time, stop

pressing the SLEEP button.

SLEEP will appear on the display, except for "OFF" mode.

The Sleep Timer is now set. Before the system switches to standby mode, a countdown of 10 seconds will be displayed.

"SLEEP 10" "SLEEP 9".... "SLEEP 1" "SLEEP"

While SLEEP mode is activated

To check the remaining length of time

Press SLEEP once.

To change the preset sleep timer

Press SLEEP twice.

The display will show the remaining time followed by the sequence of sleep timer options.

To deactivate the Sleep Timer

Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button.

3/7/01, 2:23 PM

3139 115 20742

 

Page 26
Image 26
Philips MC50-70 manual Clock/Timer, Sleep Timer Setting, While Sleep mode is activated

MC50-70 specifications

The Philips MC50-70 is a versatile and compact multimedia system that exemplifies the brand's commitment to high-quality audio and user-friendly design. Designed for music enthusiasts who appreciate both style and performance, this system incorporates a range of features and technologies that enhance the listening experience.

One of the standout features of the Philips MC50-70 is its powerful sound output. Equipped with dynamic bass enhancement technology, it delivers rich low frequencies that add depth to music without compromising clarity. The dual built-in speakers are designed to provide a wide sound stage, ensuring that every note and beat resonates throughout the room.

For those who enjoy flexibility in their audio sources, the MC50-70 supports multiple connectivity options. It includes traditional CD playback, allowing users to enjoy their favorite albums, as well as compatibility with USB devices for easy access to digital music files. The system also features an auxiliary input, enabling connections to external devices like smartphones or tablets, facilitating seamless playback of music wherever users may store it.

The user-friendly interface of the Philips MC50-70 is another highlight worth noting. Its intuitive controls and clear display make navigating through playlists and settings effortless. Additionally, the system comes with a remote control, offering convenience for users who prefer to enjoy their music from a distance.

Bluetooth technology is integrated into the MC50-70, enabling wireless streaming of audio from compatible devices. This feature enhances the overall user experience, as it eliminates the clutter of cables while providing the freedom to move around. Whether hosting a gathering or simply relaxing, users can easily share their favorite tunes with friends or family.

In terms of design, the Philips MC50-70 boasts a sleek and modern appearance that can complement any home decor. Its compact size makes it an excellent choice for those with limited space, allowing it to fit seamlessly into a living room, bedroom, or den.

Overall, the Philips MC50-70 represents a harmonious blend of cutting-edge technology, functional features, and aesthetic appeal. With its powerful audio capabilities, varied connectivity options, and user-friendly design, it stands out as a reliable choice for any music lover looking to elevate their listening experience.