3 Connect

Place the unit

2Insert the stripped part of the wire completely.

Insert the right speaker wires to “R”, left speaker wires to “L”.

Insert the red wires to “+”, black wires to “-”.

3Release the socket fl ap.

a b c

1Place the unit near to the TV.

2Place the left and right speakers at equal distance from the TV and at an angle of approximately 45 degrees from the listening position.

Note

To avoid magnetic interference or unwanted noise, never place this apparatus and speakers too close to any radiation devices.

Never place this unit in an enclosed cabinet.

Install this unit near the AC outlet where the AC power plug can be easily reached.

Connect speakers

Note

Ensure that the colors of the speaker wires and terminals are matched.

For optimal sound, use the supplied speakers only.

Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifi cations section of this manual.

1Hold down the socket fl ap.

Connect FM antenna

8

Tip

For optimal reception, fully extend and adjust the position of the antenna.

For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL jack.

The unit does not support MW radio reception.

1 Connect the supplied FM wire antenna to the FM AERIAL socket on the unit.

12EN

Page 11
Image 11
Philips MCD122 user manual Place the unit, Connect speakers, Connect FM antenna