Disc Operations
Programming favourite tracks
For VCDs/CDs
You can select and program up to 99 desired tracks for playback in the desired sequence. If you like, store any track/chapter/title more than once.
1During playback, press 9 twice to fully stop the playback.
2Press PROG on the remote control (or PRGOGRAM on the system) to activate programming mode.
➜On the TV screen, ÒPROGRAMÓ and ÒP 00:00Ó are displayed.
➜On the systemÕs display,ÒPRGÓ flashes, and P00: 00 is displayed.
3Use the Numeric Keypad
4Press OK on the remote to store the track. ➜ P00 is changed to P01 , indicating the first programmed track is stored and the next program sequence is available.
5Repeat steps
➜ If you attempt to program more than 99 tracks, FULL is displayed, and no track can be stored.
6PressÉÅto playback the program.
➜ ÒPRGÓ is displayed during playback.
Display information
During playback, press DISPLAY on the remote control repeatedly to display various disc playback time on the TV screen ( and the systemÕs display).
For DVDs:
TITLE ELAPSED - elapsed playback time of current title
TITLE REMAIN - remaining time of current title
CHAPTER ELAPSED - elapsed playback time of current chapter
CHAPTER REMAIN - remaining time of current chapter
OFF - turns off the display information
For VCDs/CDs
➜For VCD with PBC feature, PBC must be turned off first.
SINGLE ELAPSED - elapsed playback time of current track
SINGLE REMAIN - remaining time of current track
TOTAL ELAPSED - elapsed playback time of disc.
TOTAL REMAIN - remaining playback time of disc
OFF - turns off the display information
English
To Erase program
You can erase program by doing one of the following:
●During program playback, press 9 two times.
●Open the disc door.
➜ ÒPRGÓ disappears from the display.
Helpful hints:
–Programming is not available for DVD and MP3 disc.
25
