Philips MCD139 Tuner, Tuning to radio stations, Storing preset radio stations, English, Autoprog

Tuner

English

Tuning to radio stations

1Press STANDBY-ONy on the set to switch on the last selected source.

2Press repeatedly SOURCE (or TUNER on the remote) until FM is displayed.

3 Press and hold TUNING à/ á on the set until the frequency in the display starts changing.

➜Display shows SEARCH during automatic tuning.

➜After the system tunes to a station of sufficient reception, display shows its frequency .

●To tune to a weak station, press briefly and repeatedly TUNING à / á (or à / á on

the remote) until an optimal reception is found.

4Repeat Step 3 if necessary until you find the desired radio station.

Storing preset radio stations

You can preset up to 40 FM stations regardless of the reception.

Manual programming

1Tune to your desired radio station (refer to ÒTuning to radio stationsÓ).

2Press briefly PROGRAM (PROG on the remote control) on the remote.

➜ ÓP0OÓ and ÒPRGÓ are displayed.

3Press ¡ / ™ (or Numberic keys on the remote) to select the desired preset number.

4Press again PROGRAM (PROG on the remote control) to store the radio station. ➜ ÒPRGÓ disappears on the display.

●Repeat steps 1-4 to store other radio stations.

Helpful hints:

– You can erase a preset station by storing another frequency in its place.

Autostore: automatic programming

Autostore automatically starts programming radio stations from preset 1. Any previous presets e.g. manually programmed will be erased.

●In tuner mode, press and hold PROGRAM on the set until AUTOPROG appears.

➜During automatic programming, display shows

AUTOPROG.

➜Available stations are programmed (40 FM).

➜After all stations are stored, the first autostore preset station automatically plays.

Listening to preset radio stations

●In tuner mode, press ¡ / ™ (or Numberic keys on the remote) to select the desired preset number.

➜ The preset number, radio frequency, and waveband are displayed.

Deleting a preset radio station

1In tuner mode, press ¡ / ™ (or Numberic keys on the remote) to select the desired preset number.

➜ The preset number, radio frequency, and waveband are displayed.

2Press and holdÇuntil Ò DELETEDÓ appears.

➜The current preset radio station will be deleted.

➜All other preset radio stations with higher numbers are decreased by one.

32