Philips MCD139B Connections, Connecting the FM, Connecting a VCR or, antenna, cable/satellite box

		Connections
Step 4: Connecting the FM	Step 6: Connecting a VCR or
antenna		cable/satellite box

English

●Connect the supplied FM antenna to the FM (75 Ω) jack at the back of the main unit. Extend the FM antenna and fix its end to the wall.

Step 5: Connecting the power cord

IMPORTANT!

–Never make or change any connection with the power switched on.

ANTENNA

FM

(75Ω)

1

2

●After everything is connected properly, plug in the AC power cord to the power socket.

Viewing and listening to playback

ANTENNA FM

(75Ω)

Connect the VCR or Cable/Satellite Box to the TV system as shown.

Using the audio cables (red/white, not supplied) Connect the systemÕs AUX IN (L/R) jacks to the AUDIO OUT jacks on the VCR or Cable/ Satellite box.

Before starting operation, press AUX on the remote control to select ÒAUXÓ in order to activate the input source.

Using the VCR for recording DVDs

Some DVDs are copyright-protected.You cannot record or dub protected discs using a VCR.

3Connect the systemÕs COMPOSITE VIDEO jack to the VIDEO IN jack on the VCR.

4Connect the systemÕs LINE OUT (R/L) jacks to the AUDIO IN jacks on the VCR. This will allow you to make analog stereo (two channel, right and left) recording.

To view DVD playback while recording You must connect the system to your TV system using the S-VIDEO (as shown above) or the COMPONENT VIDEO OUT (Pr Pb Y) video connection.

13