1

Tip

See the User Manual for other TV connection options.

Notes for the remote control:

First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or FM for example).

Then select the desired function ( 2;, í, ë for example).

Connect the speaker cables.

2

Connect the FM antenna.

3

Connect the composite video cable (yellow, supplied) to a TV.

4

Connect the power cords of the system and TV.

A

Y

PB

PR

 

 

 

FM wire antenna

A To hear the sound of this DVD Player

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

through your TV, use the audio cables (white/

 

 

 

 

 

 

 

 

 

 

 

 

 

red, supplied) to connect LINE OUT (L/R)

 

 

 

 

 

 

 

 

 

 

 

 

 

jacks of the DVD Player to the

speaker

 

 

 

 

 

 

 

 

 

speaker

corresponding AUDIO IN jacks on the TV.

(right)

 

 

 

 

 

 

 

 

 

(left)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power adaptor

Y

PB

PR

B To listen to TV through this system, use a cinch cable (not supplied) to connect AUX IN jack (3.5mm) to the corresponding AUDIO OUT jacks on the TV set.

Setting up the TV

1

Press SOURCE (DISC on the remote control) to select disc source.

2

Turn on the TV and set it to the correct Video In channel.

Page 2
Image 2
Philips MCD177/58 quick start Setting up the TV, Tip