Preparing the Monitor for Wall-Mounting

NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket.

To attach the monitor to a mounting fixture:

1.Set the monitor screen face down on a flat, soft, protected table or desk surface with the support column overhanging the edge.

2.If the center column and base are attached to the monitor, pinch together the two release tabs on the bottom of the base (1) and pull the base off the center column (2). Then press the button on the rear of the center column (3) and slide the center column off the monitor support column

(4).

Figure 2-2Removing the Monitor Center Column and Base

3.Remove the two screws that attach the support column to the monitor (1), then slide the support column back and remove it from the monitor (2).

Figure 2-3Removing the Monitor Support Column

4 Chapter 2 Setting Up the Monitor

ENWW