Date/Time Settings
The Date/Time settings allow you to set the date and time for the monitor.
To set the date and time:
1.Select the Date/Time tab in the Settings module.
2.Select your time zone to automatically set the date and time or click the Manual button and manually set the date and time.
3.Click the Apply button to save the settings.
Language Settings
The Language settings allow you to select a language for the monitor.
To select a language:
1.Select the Language tab in the Settings module.
2.Select a language.
3.Click the Apply button to save the settings.
System Settings
The System settings allow you to return all settings to the factory default values, set the monitor’s timer to put the display in standby mode after a designated period of inactivity, update the software, lock the monitor's screen, and enable or disable the fast boot feature.
To return all settings to the factory default values:
1.Select the System tab in the Settings module.
2.Click the Set Default Value button.
3.Click the Apply button to save the settings.
To set the timer so that the monitor goes into standby mode after a designated period of inactivity:
1.Select the System tab in the Settings module.
2.In the Turn Off the Display section, adjust the hours and/or minutes to transpire before the display automatically goes into standby mode if there is no activity detected. You can also select the Never button to disable the timer. The monitor will return to full power if it detects mouse or keyboard activity.
3.Click the Apply button to save the timer’s settings.
To update the software:
20 Chapter 3 Using the Net Mode Interface | ENWW |