Philips MCD179/58 Sound Control, To switch off the volume temporarily, DBB Dynamic Bass Boost

Models: MCD179/58 PDCC-ZYL-0811

1 41
Download 41 pages 2.46 Kb
Page 20
Image 20

English

Basic Operations

Volume control

 

LOUDNESS

 

 

 

Press VOLUME (or VOL +/- on the remote) to increase or decrease the volume level.

The display briefly shows ”VOL” and a volume value from “01” to “31” ( “MIN” or “MAX” is displayed when adjusted to the lowest or highest volume level).

To switch off the volume temporarily

Press MUTE on the remote.

Playback will continue without sound and “MUTE” appears.

To activate sound reproduction, you can:

– press MUTE again;

– adjust the volume controls;

– change source.

Sound Control

DBB (Dynamic Bass Boost)

DBB enhances the bass response.

Press breifly LOUD/DBB to enable or disable DBB feature.

If DBB is activated, “DBB” will be shown.

Helpful hints:

Some discs might be recorded in high modulation, which causes a distortion at high volume. If this occurs, switch off DBB or reduce the volume.

DSC (Digital Sound Control)

DSC provides a different type of preset sound equalizer setting.

Press DSC on the remote (or on the system) repeatedly to select:

POP(default), CLASSIC, ROCK, JAZZ.

LOUDNESS feature enables the system to automatically increase the treble and bass sound effect at low volume (the higher the volume, the lower the treble and bass increase).

Press and hold LOUD/DBB on the remote control to enable/disable LOUDNESS feature.

icon appears/disappears after this feature is enabled/disabled.

20

Page 20
Image 20
Philips MCD179/58 manual To switch off the volume temporarily, DBB Dynamic Bass Boost, DSC Digital Sound Control