Setting the clock
1
2
3
4
In standby mode, press and hold CLOCK on the system.
When the hour digits flash, turn the VOL control on the front panel or press VOL +/- on
the remote to set the hours.
Press CLOCK again and the minute digits flash. Then turn the VOL control on the front
panel or press VOL +/- on the remote to set the minutes.
Press CLOCK again to confirm the time setting.
Setting system menu options
Tip
See chapters "Preparations" and "System Menu Options" in the User
Manual for detailed descriptions.
USB
LATIN
DIVX(R) VODDIVX(R) VOD
Before using the remote control
1 Pull out the plastic protective sheet.
2 Select the source you wish to control by pressing one of the source
select keys on the remote control (for example CD, TUNER).
3 Then select the desired function (for example ÉÅ , à , á)
Remove the plastic protective sheet
Important!
– To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY-ON on the set for 3
seconds or more to switch to normal standby mode first before proceeding with the procedures below.
MCD395 QUG_Eng_58 2010.4.2, 12:423