Philips MCD515 owner manual Connecting speakers, Connecting TV, Antenna connection, AM Antenna

Step 2: Connecting speakers

12

Connect the speaker wires to the SPEAKERS terminals, right speaker to "RIGHT" and left speaker to "LEFT", coloured (marked) wire to "+" and black (unmarked) wire to "-". Fully insert the stripped portion of the speaker wire into the terminal as shown.

Notes:

–Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.

–For optimal sound performance, use the supplied speakers.

–Do not connect more than one speaker to any one pair of +/- speaker terminals.

–Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

Connections

FM Antenna

●For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal.

Step 4: Connecting TV

IMPORTANT!

–You only need to make one video

connection from the following options, depending on the capabilities of your TV system.

–Connect the DVD system directly to the TV.

Using component Video In jack (Cr Cb

Y)

English

Step 3: Antenna connection

Connect the supplied AM loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception.

AM Antenna

2

AM

R

R

DIGITAL
OUT
LINE OUT	L
	L
AUX/
CDR IN

1

3

AM ANTENNA FM ANTENNA

●Position the antenna as far as possible from a TV, VCR or other radiation source.

15