Philips MCD708/58 user manual Setting the clock, Setting sleep/wake-up timer, Sleep timer setting

Other Functions

English

Setting the clock

1In Standby mode, press and hold CLOCK/RDS on the remote until the time flashes on the display.

➜ ÓCLOCK SETÓ is displayed briefly.Then, the hour digits flash on the display screen.

2Turn VOLUME -/+clockwise or anticlockwise or press VOLUME +/- on the remote to set the hours.

3Press CLOCK/RDS to confirm.

➜ The minute digits flash on the display screen.

4Turn VOLUME -/+clockwise or anticlockwise or press VOLUME +/- on the remote to set the minutes.

5Press CLOCK/RDS again to confirm the clock setting.

Notes:

–This system only supports 24-hour mode.

–The clock setting will be erased when the system is disconnected from the power supply.

–The system will exit clock setting mode if no button is pressed within 30 seconds.

Setting sleep/wake-up timer

Sleep timer setting

In power-on mode, the sleep setting enables the system to switch to standby mode automatically at a preset time.

1In power-on mode, press SLEEP/TIMER on the remote repeatedly to select a preset time.

➜The selections are as follows (time in minutes):

00 ➜ 10 ➜ 20 ➜ 30 ➜ 40 ➜ 50 ➜ 60 ➜ 70

➜80 ➜ 90 ➜ 00

2When you reach the desired length of time, stop pressing SLEEP/TIMER.

➜ ÓSLEEPÓ appears.

●Press SLEEP/TIMER repeatedly until Ò00Ó is displayed, or press ECO POWER/ STANDBY-ONB (B on the remote).

In standby mode, the timer setting enables the system to switch on automatically at a set time.

Wake-up timer setting

IMPORTANT!

– Before setting the timer, ensure that the clock is set correctly.

1 Press and hold SLEEP/TIMER until the time flashes on the display.

➜ ÓTIME SETÓ scrolls.Then, the hour digits flash on the display screen.

2Turn VOLUME -/+clockwise or anticlockwise or press VOLUME -/+on the remote to set the hours.

3Press SLEEP/TIMER to confirm.

➜ The minute digits flash on the display screen.

4Turn VOLUME -/+clockwise or anticlockwise or press VOLUME -/+on the remote to set the minutes.

5Press SLEEP/TIMER to confirm the time setting.

➜ ÓOFFÓ flashes on the display screen.

6Turn VOLUME -/+clockwise or anticlockwise or press VOLUME -/+on the remote to select ÒONÓ.

➜ icon appears on the display screen.

To deactivate the timer

● Select ÒOFFÓ at Step 6.

To deactivate the sleep timer

34