26
English
System Menu Options
Basic operations
1Press SYSTEM to enter the Setup Menu.
2Press 1 2 to select a page to be set.
3Press 3 4 to highlight an option.
4Enter its submenu by pressing 2 or OK.
5Move the cursor by pressing 3 4 to highlight
the selected item.
➜In cases of value setting, press 1 2 to adjust
values.
6Press OK to confirm.
To return to the upper-level menu
●Press 1 or OK (in cases of value adjustment).
To exit from the menu
●Press SYSTEM again.
➜The settings will be stored in the player’s
memory even if the player is switched off.
Note:
–Some of the features in the System Menu
Options are described in “Getting Started”.
GENERAL SETUP PAGE
The options included in GENERAL SETUP PAGE
are: “TV DISPLAY”, “OSD LANGUAGE”,
“SCREEN SAVER”and “DIVX CODE”.
TV DISPLAY
Set the aspect ratio of the DVD Player according
to the TV you have connected.
➜NORMAL/PS (panscan): If you have a
normal TV and want both sides of the picture to
be trimmed or formatted to fit your TV screen.
➜NORMAL/LB (letterbox): If you have a
normal TV. In this case, a wide picture with black
bands on the upper and lower portions of the
TV screen will be displayed.
➜WIDE: If you have a wide-screen TV.
OSD LANGUAGE
See “Getting Started-Step 3: Setting language
preference”.
SCREEN SAVER
This function is used to turn the screen saver on
or off.
➜ON: In STOP, PAUSE or No DISC mode, if no
actions are performed about 3 minutes, the
screen saver will be activated.
➜OFF: Screen saver is disabled.
pg 001-039_MCD755_93_Eng 2007.8.29, 10:2126