34
English
Other Functions

Setting the clock

1In Standby mode, press and hold CLOCK/RDS
on the remote until the time flashes on the
display.
➜”CLOCK SET” is displayed briefly. Then, the
hour digits flash on the display screen.
2Turn VOLUME -/+ clockwise or anticlockwise
or press VOLUME +/- on the remote to set
the hours.
3Press CLOCK/RDS to confirm.
➜The minute digits flash on the display screen.
4Turn VOLUME -/+ clockwise or anticlockwise
or press VOLUME +/- on the remote to set
the minutes.
5Press CLOCK/RDS again to confirm the clock
setting.
Notes:
–This system only supports 24-hour mode.
– The cloc k setting will be erased when the system
is disconnected from the power supply.
–The system will exit clock setting mode if no
button is pressed within 30 seconds.

Setting sleep/wake-up timer

Sleep timer setting
In power-on mode, the sleep setting enables
the system to switch to standby mode
automatically at a preset time.
1In power-on mode, press SLEEP/TIMER on
the remote repeatedly to select a preset time.
➜The selections are as follows (time in
minutes):
SLEEP 00 ➜ SLEEP 10 ➜ SLEEP 20 ... SLEEP 80
➜ SLEEP 90 ➜ SLEEP 00
2When you reach the desired length of time, stop
pressing SLEEP/TIMER.
➜ appears.
To deactivate the sleep timer
●Press SLEEP/TIMER repeatedly until “00” is
displayed, or press STANDBY ONB (B on
the remote).
In standby mode, the timer setting enables
the system to switch on automatically at a set
time.
Wake-up timer setting
IMPORTANT!
–Before setting the timer, ensure that
the clock is set correctly.
1Press and hold SLEEP/TIMER until the time
flashes on the display.
➜”TIME SET” scrolls. Then, the hour digits
flash on the display screen.
2Turn VOLUME -/+ clockwise or anticlockwise
or press VOLUME -/+ on the remote to set
the hours.
3Press SLEEP/TIMER to confirm.
➜The minute digits flash on the display screen.
4Turn VOLUME -/+ clockwise or anticlockwise
or press VOLUME -/+ on the remote to set
the minutes.
5Press SLEEP/TIMER to confirm the time
setting.
➜”OFF” flashes on the display screen.
6 Turn VOLUME -/+ clockwise or anticlockwise
or press VOLUME -/+ on the remote to select
“ON”.
➜ icon appears on the display screen.
To deactivate the timer
●Select “OFF” at Step 6.
pg 001-039_MCD755_93_Eng 2007.8.29, 10:2134