28
English
System Menu Options
Basic operations
1Press SYSTEM to enter the Setup Menu.
2Press 1 2 to select a page to be set.
3Press 3 4 to highlight an option.
4Enter its submenu by pressing 2 or OK.
5Move the cursor by pressing 3 4 to highlight
the selected item.
➜In cases of value setting, press 1 2 to adjust
values.
6Press OK to confirm.
To return to the upper-level menu
●Press 1 or OK (in cases of value adjustment).
To exit from the menu
●Press SYSTEM again.
➜The settings will be stored in the player’s
memory even if the player is switched off.
Note:
–Some of the features in the System Menu
Options are described in “Getting Started”.
General Setup Page
The options included in General Setup page are:
“TV Display”, “OSD Language”, “Screen
Saver”and “DIVX Code”.
CODE
TV Display
Set the aspect ratio of the DVD Player according
to the TV you have connected.
➜NORMAL/PS: If you have a normal TV and
want both sides of the picture to be trimmed or
formatted to fit your TV screen.
➜4:3 NORMAL/LB: If you have a normal TV.
In this case, a wide picture with black bands on
the upper and lower portions of the TV screen
will be displayed.
➜WIDE: If you have a wide-screen TV.
OSD Language
See “Getting Started-Step 3: Setting language
preference”.
Screen Saver
This function is used to turn the screen saver on
or off.
CODE
➜On: In STOP, PAUSE or No DISC mode, if no
actions are performed about 3 minutes, the
screen saver will be activated.
➜Off: Screen saver is disabled.