System Menu Options
English
3D Processing
The option included in 3D Processing is: “Reverb Mode”.
Video Setup Page
The options included in Video Setup page are: “Component”,“TV Mode”, “Quality” and “HDMI Setup”.
COMPONENT
QUALITY
HDMI SETUP
Reverb Mode
Reverb mode provides a virtual surround sound experience using just two speakers.
➜Off, Concert, Living Room, Hall, Bathroom, Cave, Arena and Church.
HDCD
The option included in HDCD (High Definition Compatible Digital) is: “Filter”.
Filter
Sets the audio output cutoff frequency point when playing an HDCD disc.
➜Off, 44.1K and 88.2K.
Night Mode
In this mode, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching your favourite action movie without disturbing others at night.
➜On: Select this to level out the volume.This feature is only available for movies with Dolby Digital mode.
➜Off: Select this when you want to enjoy the surround sound with its full dynamic range.
Component
Sets the video output according to your video connection.This setting is not required if you are using the VIDEO jack (yellow) to connect the DVD micro system to your TV.
➜
➜Pr/Cr Pb/CbY: Select this if you have connected the DVD micro system to your TV using Component video jacks.
Note:
–This option is available only when the "HDMI" is set to "OFF".
TV Mode
Selects interlace or
➜P-SCAN and Interlace.
In the progressive scan mode, you can enjoy the high quality picture with less flickers. It only works when you have connected the DVD player's Y Pb Pr jacks to your TV that supports the progressive video input. Otherwise, a distorted picture will appear on the TV. For proper progressive scan set up, see “Getting
Note:
–This option is available only when the "HDMI" is set to "OFF".
30
