7EN
Prepare the remote control
Caution
•Risk of explosion! Keep batteries away from heat,
sunshineorre.Neverdiscardbatteriesinre.
•Risk of decreased battery life! Never mix different
brands or types of batteries.
•Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
•Danger of explosion if battery is incorrectly replaced.
Replaceonlywiththesameorequivalenttype.
For rst-time use:
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1 Open the batter y compartment.
2 Inser t one CR2025 battery with correct
polarity (+/-) as indicated.
3 Close the batter y compartment.
Turn on
Press POWER.
» The unit switches to the last selected
source.
Switch to standby
Press POWER again to switch the unit to
standby mode.
» The red standby indicator turns on.
» The backlight on the display panel turns off.
4 PlayPlay from disc
1 Press SOURCE repeatedly to select the
DISC source.
2 Pull to open the disc compar tment on the
top of the device.
3 Inser t a disc with printed side facing
upward.
4 Close the disc compar tment.
» Play starts automatically. If not, press
.
Play from USB
Note
•Make sure that the USB device contains playable audio
content.
1 Press SOURCE repeatedly to select the
USB source.