Philips MCM149 Clock/Timer, Setting the clock, Setting the timer, 5Press CLOCK/DISPLAY again

Clock/Timer

STANDBY-ON	M I C RO S YS T E M M C M 1 4 9
iR	CD/CD-R/CD-RW COMPATIBLE

SOURCE	VOL
	TUNING	MODE	PROG
ALBUM/PRESET
	VOL
DBB

Setting the clock

1In standby mode, press and hold CLOCK/ DISPLAY on the remote control set for 2 seconds.

2Press PROG. to select 12-hour or 24-hour display.

3Press CLOCK/DISPLAY to confirm. ➜ The clock digits for the hours flash.

4Press TUNING 4 ¢ (à / á on the remote control) to set the hours.

5Press CLOCK/DISPLAY again.

➜ The clock digits for the minutes flash.

6Press TUNING 4 ¢ (à / á on the remote control) to set the minutes.

7Press CLOCK/DISPLAY to confirm the time.

Note:

– The backlight for clock display is off in standby.

Setting the timer

●The system can be used as an alarm clock, whereby the CD or TUNER is switched on at a set time.The clock time needs to be set first before the timer can be used.

1In standby mode, press and hold TIMER about 2 seconds on the remote control.

2Press SOURCE (or DISC/TUN on the remote control) to select sound source.

3Press TIMER to confirm your desired mode. ➜ The clock digits for the hours flash.

4Press TUNING 4 ¢ (à / á on the remote control) to set the hours.

5Press TIMER again.

➜ The clock digits for the minutes flash.

6Press TUNING 4 ¢ (à / á on the remote control) to set the minutes.

7Press TIMER to confirm the time.

➜ The timer is now set and activated.

Notes: .

–If CD source is selected and no disc is in the CD tray or the disc has an error,TUNER will be selected automatically.

Activating and deactivating

TIMER

●In standby or during playback, press TIMER ON/OFF once.

➜ Display shows if activated, and disappears if deactivated.

Activating and deactivating

SLEEP

The sleep timer enables the system to switch off by itself after a set period of time.

●Press SLEEP on the remote control once or more.

➜Display shows and one of the sleep time options in sequence: 60, 45, 30,15, 0, 60... if you have selected a time.

●To deactivate, press SLEEP on the remote control once or more until “ 0“ is shown, or press STANDBY ON 2on the system (or POWER on the remote control).

➜ disappears from the display.

English

19