Philips MCM167 user manual No power

Models: MCM167

1 34
Download 34 pages 10.69 Kb
Page 32
Image 32

No power

•• Ensure that the AC power plug of the Micro Hi-Fi is connected properly.

•• Ensure that there is power at the AC outlet.

•• To save power, the Micro Hi-Fi switches to standby automatically 15 minutes after disc/tape play reaches the end and no control is operated.

No sound or poor sound

•• Adjust the volume.

•• Disconnect the headphones.

•• Check that the speakers are connected correctly.

•• Check if the stripped speaker wires are clamped.

Left and right sound outputs reversed

•• Check the speaker connections and location.

No response from the Micro Hi-Fi

•• Disconnect and reconnect the AC power plug, then turn on the Micro Hi-Fi again.

Remote control does not work

•• Before pressing any function button, first select the correct source with the remote control instead of the main unit.

•• Reduce the distance between the remote control and the Micro Hi-Fi.

•• Insert the batteries with its polarities (+/– signs) aligned as indicated.

•• Replace the batteries.

•• Aim the remote control directly at the sensor on the front of the Micro Hi-Fi.

No disc detected

•• Insert a disc.

•• Check if the disc is inserted upside down.

•• Wait until the moisture condensation at the lens has cleared.

•• Replace or clean the disc.

•• Use a finalized CD or correct format disc.

Page 32
Image 32
Philips MCM167 user manual No power