To insert the remote control battery: 1 Open the battery compartment.
2 Insert the supplied AAA battery with correct polarity
3 Close the battery compartment.
Turn on
Press .
»»The unit switches to the last selected source.
Set clock
1 In standby mode, press and hold CLOCK on the remote control for more than two seconds.
»»[24H] or [12H] hour format is displayed.
2 Press/ to select [24H] or [12H] hour format, and then press CLOCK.
»»The hour digits are displayed and begin to blink.
3 Press/ to set hour, and then press
CLOCK.
»»The minute digits are displayed and begin to blink.
4 Repeat step 3 to set minute.
Note
•• If no button is pressed in 90 seconds, the system exits clock setting mode automatically.
Tip
•• You can view clock information in
Switch to standby mode
Press again to switch the unit to standby mode.
»»The clock (if set) is displayed on the panel.
Switch to ECO standby mode:
Press and hold for more than two seconds.
»»The display panel is dimmed.
Note
•• The unit switches to Eco Power Standby mode after 15 minutes in standby mode.
Switch between standby mode and ECO standby mode:
Press and hold for more than two seconds.
8EN