CD/MP3-CD Operation
English
Important!
The lens of the CD player should never be touched.
Loading a disc
This CD player plays Audio Discs including CD Recordables,
●
1Press SOURCE on the front panel of the system to select CD or press CD on the remote.
2Press OPEN•CLOSEç to open the CD compartment.
➜ OPEN is displayed when the compartment cover slides up.
3Insert a disc with the printed side facing up. Press OPEN•CLOSEç again to close the
compartment.
➜ READING is displayed as the CD player scans the contents of a disc, and then the total number of tracks and playing time (or the total number of albums and tracks for MP3 disc) are shown.
Basic playback controls
To play a disc
●Press ÉÅ to start playback.
➜ The current track number and elapsed playing time of the track are displayed during disc playback.
To select a different track
●Press PRESETí / ë (or í / ë on the remote) once or repeatedly until the desired track number appears in the display.
●If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will need to press ÉÅ to start playback.
Text display during playback In CD mode
●Press DISPLAY to show the current track number and remaining playback time.
In MP3-CD mode
●Press DISPLAY repeatedly to show the current album and track numbers followed by ID3 information (if available).
To find a passage within a track
1Press and hold down on ALBUM/TUNE à / á (or ALBUM
volume.
2When you recognize the passage you want, release ALBUM/TUNE à /á (or ALBUM
➜ Normal playback continues.
To interrupt playback
●Press ÉÅduring playback.
➜The display freezes and the elapsed playing time flashes when playback is interrupted.
➜To resume, press ÉÅ again.
To stop playback
●Press 9.
14
