Philips MCM240 CD/MP3-CDOperation, Reviewing the program, Erasing the program, English

English

CD/MP3-CD Operation

3Press PROGRAM to confirm the track number to be stored.

➜ PROG X is shown briefly, followed by the number of the track (for MP3-CD, the album and title numbers of the track) you just stored. X denotes the next program number to be stored

4Repeat steps 2-3 to select and store all desired tracks.

➜ FULL is displayed if you attempt to program more than 40 tracks.

5To start playback of your disc program, press STOP 9 followed by ÉÅ or press ÉÅ

directly.

Reviewing the program

In STOP mode, press and hold PROGRAM until the display shows all your stored track number in sequence.

Erasing the program

You can erase the program by:

●pressing STOP 9 once in the STOP mode;

●pressing STOP 9 twice during playback;

●opening the CD compartment;

➜ PROGRAM disappears, CLEAR scrolls and then disappears from the display.

16