Philips MCM285 user manual Clock/Timer, Setting the timer

		Clock/Timer
To check the remaining length of time	To deactivate the timer,
after sleep timer is activated	M PressTIMER in active or standby mode.
M Press SLEEP once.	©	disappears if the timer is deactivated.

English

Setting the timer

MThe system can switch on to CD,TUNER, or MP3 LINK mode automatically at a preset time, serving as an alarm to wake you up.

IMPORTANT!

–Before setting the timer, ensure that the clock is set correctly.

–The timer will always be switched on after it has been set.

–The timer will not start if a recording is in progress.

–The volume of the timer will increase gradually from the minimum level to the last tuned volume level (If the last tuned volume level is less than 15, it will increase gradually from the minimum level to 15).

1Press TIMER on the remote control. © The last timer setting is shown.

2Press TIMER again for more than 2 seconds.

©7KHFORFNGLJLWVIRUWKHKRXUVÁDVK

3Press PRESET +/- í/ë (í/ë on the re- mote) to set the hours.

4Press TIMER again.

©7KHFORFNGLJLWVIRUWKHPLQXWHVÁDVK

5Press PRESET +/-í/ë (í/ë on the remote) to set the minutes.

6Press TIMER WRFRQÀUPWKHWLPH

© The timer is now activated and display shows .

Note:

–If the last selected source is MP3-LINK/AUX, you cannot use the remote control to set the timer.

Notes:

–When the preset time is reached, the last selected source will be played automatically.

–During timer setting, if no button is pressed within 10 seconds, the system will exit timer setting mode automatically.

–If remote control is used, timer/clock setting is available only in CD andTUNER modes.

17