Philips MCM710 Clock/Timer, Setting the clock, Viewing the clock, Setting the timer, English

Clock/Timer

English

Setting the clock

1In Standby mode, press and hold CLOCK on the remote until the time flashes on the display. ➜ ”CLOCK SET ” is displayed briefly.Then, the hour digits flash on the display screen.

2Turn VOLUME -/+clockwise or anticlockwise or press VOL +/- on the remote to set the hours.

3Press CLOCK to confirm.

➜ The minute digits flash on the display screen.

4Turn VOLUME -/+clockwise or anticlockwise or press VOL +/- on the remote to set the minutes.

5Press CLOCK again to confirm the clock setting.

Notes:

–This system only supports 24-hour mode.

–The clock setting will be erased when the system is disconnected from the power supply.

–The system will exit clock setting mode if no button is pressed within 30 seconds.

Viewing the clock

●Press CLOCK in the active mode. ➜ The clock time is displayed.

Setting the timer

●The system can be used as an alarm clock, whereby the CD, USB, FM, AUX is switched on at a set time.The clock time needs to be set first before the timer can be used.

●During setting, if no button is pressed within 30 seconds, the system will exit timer setting mode automatically.

1Press and hold TIMER on the remote control until the time flashes on the display.

➜ ”TIMER SET” is displayed briefly.Then, the hour digits flash on the display screen.

2Turn VOLUME -/+clockwise or anticlockwise or press VOL +/- on the remote to set the hours.

3Press TIMER to confirm.

➜ The minute digits flash on the display screen.

4Turn VOLUME -/+clockwise or anticlockwise or press VOL +/- on the remote to set the minutes.

5Press TIMER to confirm the time setting. ➜ ”OFF” flashes on the display screen.

6Turn VOLUME -/+clockwise or anticlockwise or press VOL +/- on the remote to select “ON”.

➜ icon appears on the display screen.

To deactivate the timer

●Select “OFF” at Step 6.

Activating and deactivating

SLEEP

The sleep timer enables the system to switch off by itself after a set period of time.

●Press SLEEP on the remote control.

➜The display shows one of the sleep time

options in the following sequence: SLEEP-00, SLEEP-10, SLEEP-20, ... SLEEP-90, SLEEP-00... Once the sleep funtion is activated, the SLEEP icon will be displayed.

●To deactivate, press SLEEP on the remote control once or more until OFF is shown, or press STANDBY-ON/ ECO POWER B

(or B on the remote).

➜SLEEP disappears.

22