LPCM Output 41
If you connected the DVD Player to a Stereo using the COAXIAL jack as
shown on page 15,you may need to adjust LPCM OUTPUT.
Discs are recorded in a certain sampling rate. The higher the sampling rate,
the better the sound quality. Some Discs are recorded in a high sampling
rate of 96 kHz. Set LPCM OUTPUT to 96K if you are playing Discs
recorded at this high rate.Otherwise, set LPCM OUTPUT to 48K.
1Press SYSTEM MENU.
2Press 2to select the AUDIO SETUP PAGE icon at the top
of the menu. Press OK or 4.
3Press 4to select DIGITAL AUDIO SETUP,then press OK.
4Press 4to select LPCM OUTPUT,then press 2.
5Press 3or 4to select 48K or 96K,then press OK. Your
selection will be highlighted in brown.
6Press SYSTEM MENU to remove the menus.
1,6
2-5