IN-CAR CONNECTION
Only use the AY 3545 car |
|
voltage converter (4.5 V, DC, |
|
positive pole to the center pin) |
|
and the AY 3501 car cassette |
|
adapter. Any other product may |
|
damage the unit. | 4,5 V DC |
1 Put the CD player on a |
|
horizontal, |
|
stable surface. Make sure it |
|
is in a safe place, where the |
|
player is neither a danger |
|
nor obstacle to the driver and passengers. |
|
2Connect the DC plug of the voltage converter to the 4.5V DC jack of the CD player (only for a 12 V car battery, negative grounding).
3Insert the voltage converter into the cigarette lighter jack. If necessary, clean the cigarette lighter jack to obtain a good electrical contact.
4Turn down the volume and connect the cassette adapter plug to the LINE OUT/p jack of the CD player.
5Carefully insert the cassette adapter into the car radio’s cassette compartment.
6Make sure the cord does not hinder your driving.
7Start the CD player, set VOL E to position 8 and adjust the sound with the car radio controls.
•Always remove the voltage converter from the cigarette lighter jack when the CD player is not in use.
Notes: – Avoid excessive heat from the car heating or from direct sunlight (e.g. in a parked car in the summer).
–If your car radio has a LINE IN jack, it is better to use it for the car radio connection instead of the cassette adapter. Connect the signal lead to this LINE IN jack and to the LINE OUT/p jack of the CD player.
17
