Philips MG9218 manual Power Supply/Earphones, Power adapter supplied

POWER SUPPLY/EARPHONES

Power adapter (supplied )

Use only the supplied AY 3170 adapter (4.5 V/300 mA direct current, positive pole to the center pin). Any other product may damage the player.

1Make sure that the local voltage corresponds to the power adapter´s voltage.

2Connect the power adapter to the 4.5V DC jack of the player and to the wall power outlet.

4,5V DC

Note: Always disconnect the adapter when you are not using it.

Earphones

•Connect the supplied earphones to the LINE OUT/p jack.

Note: LINE OUT/p can also be used for connecting your HiFi system (signal lead) or your car radio (cassette adapter or signal lead). In both cases, the volume of the player must be set to position 8.

H O L D

LINE OU T/

VO 0

L.

Use your head when using earphones

Hearing safety: Do not play your earphones at a high volume. Hearing experts advise that continuous use at high volume can permanently damage your hearing.

Traffic safety: Do not use earphones while driving a vehicle. It may create a hazard and it is illegal in many countries. Even if your earphones are an open-air type designed to let you hear outside sounds, do not turn up the volume so high that you cannot hear what is going on around you.

9