Philips MP3-CD Basic Functions, First time setup/power up, To reinstall Plug and Play, English

Basic Functions

English

MAX

SOUND

VAC

DBB INC SURR

DISC

DSC VAC

ALBUM

SHUFFLE

REC .

IMPORTANT!

Before you operate the system, complete the preparation procedures.

Plug and Play (for tuner installlation)

Plug and Play allows you to store all available RDS stations and radio stations automatically.

First time setup/power up

1When you turn on the main supply, "AUTO INSTALL - PRESS PLAY" is displayed.

2PressÉÅ on the system to start installation.

➜"PLUG AND PLAY" .... "INSTALL" is displayed, followed by "TUNER" and "AUTO".

➜PROG starts flashing.

➜The system will automatically store the radio stations with sufficient signal strength, starting from all RDS stations and followed by FM and MW bands respectively. Weak RDS stations may be stored in later presets.

➜When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station (or the first available RDS station) will be played.

3The system will proceed to set the RDS clock if the first preset is an RDS station.

➜"INSTALL" is displayed, followed by "TIME" and "SEARCH RDS TIME".

➜When RDS time is read, "RDS TIME" is displayed and the current time will be stored.

➜If RDS station does not transmit RDS time within 90 seconds, the programme will exit

automatically and the display will show ÒNO RDS TIMEÓ.

●If the first preset is non-RDS station;

➜ The programme will exit automatically.

To reinstall Plug and Play

1In standby or demonstration mode, press and holdÉÅon the system until "AUTO INSTALL - PRESS PLAY" is displayed.

2PressÉÅagain to start installation.

➜ All previously stored radio stations will be replaced.

12