Hookups - TV (cont’d) 12
Connecting to a TV with
Component Video In Jacks
2
1
3
|
|
|
| CENTER | AUDIO |
| AUDIO | VIDEO |
|
|
|
| LINE OUT | OUT |
| IN | OUT |
|
|
|
|
|
|
|
| L |
|
|
|
|
|
|
|
| R |
|
|
|
|
|
|
|
| AM |
FR | FL | C | SR | SL |
|
|
|
|
|
|
|
| WOOFER |
| TV | AUX | S- VIDEO |
|
| SPEAKERS | (8‰) | LINE OUT |
|
|
| OUT |
AM/FM
ANTENA
FM (75‰)
Pr/Cr |
| Pb/Cb |
|
| Y | COAXIAL | OPTICAL | ||
|
|
|
|
|
| ||||
| COMPONENT |
|
|
| DIGITAL |
| |||
| VIDEO OUT |
|
|
| OUT |
|
|
Connect the DVD Receiver’s Pr/Cr Pb/Cb Y COMPONENT 1VIDEO OUT jacks to the matching Pr/Cr Pb/Cb Y VIDEO IN jacks
on the TV. You will need a component video cable
To hear TV channels through the DVD Home Cinema System,
2 connect the supplied red and white audio cables to the DVD Receiver’s red/white, right/left (TV) AUDIO IN jacks and to the TV’S right/left AUDIO OUT jacks. Match the cable colors to the jack colors.
3
Turn on the TV and set it to the correct Component Video
4 In channel. Go to the lowest TV channel and change channels down until you find the Component Video In channel. (It is not channel 3 or 4 as it might be when using a VCR.) See your TV owner’s manual for details.
Press
5 turn on the DVD Receiver. The red Standby light will disappear. 6 Set VIDEO OUT to PR PB Y. Details are on page 22.
TV DISPLAY |
|
ANGLE MARK |
|
OSD LANG |
|
VIDEO OUT | |
SCR SAVER | CR CBY |
MAIN PAGE |
|
SET VIDEO OUTPUT |
|
Helpful Hint
•On the TV, the Component Video In jacks may be labeled YUV or Pr/Cr Pb/Cb Y and may be red, blue, and green.