Philips MS3250C99 manual Connect one end of the S-VIDEO, Connect other end of the S

	USING THE S-VIDEO INPUT JACKS										Let's
											Look
											Inside!
he S(uper)-Video connection on the
Trear of the TV can provide you with
better picture detail and clarity for the							IF YOU ARE USING A
playback of accessory sources such as
							MONO DEVICE, USE
DBS (digital broadcast satellite), DVD
							ONLY THE AUDIO
(digital video discs), video games, and							L/MONO JACK.
S-VHS VCR (video cassette recorder)		1
tapes than the normal antenna picture				BACK OF TV
connections.
NOTE: The accessory device must
have an S-VIDEO OUT(put) jack in
order for you to complete the connec-			Monitor out	AV1 in
tion on this page.		VIDEO
			L/
		Mono
		AUDIO					S-VIDEO
Connect one end of the S-VIDEO
		75 V
CABLE to the S-VIDEO jack on the			R
back of the TV. Then connect one end										S-VIDEO
the AUDIO (red and white) CABLES											2
to the AV1 in AUDIO L and R(left and										CABLE
right) jacks on the rear of the TV.
Connect other end of the S-							AUDIO IN
							(RED/WHITE)
VIDEO CABLE to the S-VHS (S-								OUT	OUT	S-VHS
Video) OUT jack on the back of the		5
VCR. Then connect the other ends of										ANTENNA
							R	AUDIO L	VIDEO	IN
the AUDIO (red and white) CABLES						POWER
			SLEEP
to the AUDIO (left and right) OUT										ANTENNA
								IN	IN
										OUT
jacks on the rear of the VCR.			A/CH STATUS/EXIT		CC	CLOCK
		TV	RECORD			TV/VCR				BACK OF VCR
Turn the VCR and the TV ON.		VCR	1	2		3
		ACC
Press the CH + or – buttons on the			4	5		6	6
remote to scroll the channels until			7	8		9
SVHS appears in the upper left corner
			SMART	0		SMART
of the TV screen.			SOUND			PICTURE
Slide the TV/VCR/ACC switch to			MENU			SURF		3
										VCR
the VCR position.
										EQUIPPED WITH
										S-VHS (S-Video) JACKS
Now your ready to place a prere-
corded video tape in the VCR and
press the PLAY	button.		VOL			CH
				MUTE
									SVHS
							4

SMART HELP

The S-VIDEO and VIDEO AV1 in(puts) are in parallel. The

S-VIDEO input is dominant when in use. If separate video signals are con- nected to the S-VIDEO and VIDEO AV1 in(put), the signal from the VIDEO AV1 in(put) will not be usable.

Note: SVHS will appear as a valid channel option only if a SVHS device is connected to the S-Video Input Jack. If the device is connected to the AV1 Video In, the channel will appear as AV1.

25