30
REMOTE USE WITH ACESSORY DEVICES - DIRECT METHOD
6
1SLEEP
A/CH STATUS/EXIT CC
SMART
TV
VCR
ACC
123
45
78
0
SLEEP
POWER
A/CHSTATUS/EXITCCCLOCK
TV
VCR
ACC
RECORDTV/VCR
SMART
PICTURE
VOLCH
MUTE
MENUSURF
2
SMART
SOUND
RECORD
SOUND
Your remote control is set to
work your TV and many
infrared remote (IR) control
VCRs, Cable Boxes, Satellite
Systems, DBS, DVD, etc.
However, an easy onetime step
may be necessary before the
remote will work your VCR.
Try this initial check to see if
going on to the following section
is necessary.
Place the TV/VCR/ACC
Mode Switch in the proper posi-
tion.
Point the remote control at
the device and press the POWER
button.
Does the remote turn the
device ON?
If YES, stop and try other func-
tion buttons on the remote. If
they also work the device, then
the remote is ready and no fur-
ther steps are needed.
If NO, continue... Cable Converter
SMART HELP
Remember, if more than
one number is listed, you may
have to try more than the first Three-
Digit code given in order to locate
your Device’s remote code.
NOTE: Setting up the remote is for
use with external accessory devices
only and not for use with other televi-
sion brands.
Satellite Receiver
First look up a THREE-DIGIT
remote control numberfor your
brand of Device before going
through the simple steps on the
following page.
Find yourThree-Digit Code on
pages 33-34.
VCR